How to Make the Most of Your Microdermabrasion Kit

microdermabrasion treatmentMicrodermabrasion – a great, yet simple way to smooth, blemish-free skin! Ideally, Microdermabrasion should be done by a cosmetic surgeon or a dermatologist. But guess what – you can do it at home too! However, the first thing you should do is to consult your doctor to ensure that it is right for you. Once you get a green signal from your doctor, you can go ahead. Here are tips from the experts at http://homebeautyzone.com on how to make the most of your Microdermabrasion kit.

Choose the Correct Speed for Your Skin

A home Microdermabrasion machine usually has four settings for speed.

The first and second settings are of milder speed. These are recommendable for those with a sensitive skin, while the third and fourth settings are meant for a more aggressive treatment. However, though you don’t have a sensitive skin, it’s better to start with the lowest speed setting. This will help you to condition your skin, slowly preparing it for a more forceful exfoliation. Progress towards upper settings very slowly.

Also the milder speed levels should essentially be used over the more delicate areas like around the eyes. On the neck too you should use the low settings, while on areas like chin, cheeks and forehead, a higher setting is good. Pay more attention to areas where there are more flaws, rather than those which are already unblemished.

Since every individual is different, you will have to find on your own which setting works the best for you.

Keep the Movement Upward

Keep in mind to move the machine in an upward direction because upward movement makes the skin tighter, while downward movement increases the risk of wrinkles or fine lines.

How Often should You Do Microdermabrasion?

Different products available on the market advise different frequency of the at-home treatment; but usually it is good to do it 2-3 times in a week. If this is not possible, you should do it at least once a week to achieve the desired results slowly, but steadily and effectively.

Another thing to remember is to do the procedure on weekends so that your skin can get sufficient time to recover before your resume to your work. One thing should be mentioned here that as such Microdermabrasion has no recovery time; however, the more rest your skin will get after the procedure, the more excellent results you will get.

Keep Your Microdermabrasion Machine Clean

You should remember to keep your machine always clean. You should pay attention to certain parts of the machine; e.g. the filter should be replaced regularly so as to make your machine work correctly every time. To keep the tips on the wand clean, a cleaner is available on the market. Remember to follow the guidelines about how to clean or replace parts of the Microdermabrasion machine, on the user manual exactly, to ensure that your machine works properly every time.

If there is only one tip in your machine, consider using more types. Experienced Microdermabrasion kit users are of opinion that multiple types of tips give the best results. This is because there are different areas in our skin that vary in color, tone and texture. Even some of them are hard to reach. So, multiple types of tips take care of all of them and your skin becomes better at all levels.

Home Beauty Zone is a place where you will get all the information on Microdermabrasion. Don’t forget to visit this website if you are planning to have Microdermabrasion.